Molds and mildew quickly grow on damp areas in our house. Mildews are molds that spread outward, while molds is a more general term for this kind of fungi. Sometimes certain molds would be harder to remove as it goes deeper in its base. That’s why it is crucial always to keep an eye on these before it worsens. Deal with mold formation as soon as we notice it.
This article will teach you the 7 best product to clean mold and mildew efficiently and prevent it from spreading.
Comparison Chart
| IMAGE | PRODUCT | DETAILS | PRICE |
|---|---|---|---|
| StoneTech Mold & Mildew Stain Remover | StoneTech Mold and Mildew Stain Remover is an easy to use specialty cleaner used for removing unsightly molds and mildews from natural stone surfaces. | ||
| Clorox Tilex Mold & Mildew Remover Spray | The Clorox Tilex Mold and Mildew Remover is a product that delivers powerful cleaning because you can do it without scrubbing the surface. | ||
| MiracleMist ENCRMMIC4 Instant Mold and Mildew Stain Remover | Miracle Mist Instant Mold Remover removes old molds and mildews. You can rely on its concentrated solution to deal with stubborn stains from molds. | ||
| EcoClean Solutions Mold, Mildew & Algae Remover | Are you tired of getting products without getting results? This mold remover is guaranteed not to waste your time and money | ||
| RMR-86 Pro Instant Mold Stain & Mildew Stain Remover | RMR-86 Pro Instant Mold Remover is a contractor grade product specifically made for professional use with 5x strength of typical stain removal products. | ||
| Zep Mold Stain and Mildew Stain Remover | The Zep Mold and Mildew Stain Remover have been trusted by professionals for over 80 years, establishing expertise in developing professional cleaning solutions. | ||
| Star brite Mold & Mildew Stain Remover | This professional-grade product has a high alkaline, triple-action formula that lifts dirt and stains cuts grease and grime, and removes molds and mildew upon contact. |
A Detailed Review on the 7 Best Products to Clean Mold And Mildew
StoneTech Mold & Mildew Stain Remover
StoneTech Mold and Mildew Stain Remover is an easy to use specialty cleaner used for removing unsightly molds and mildews from natural stone surfaces. Its unique formula won’t damage the stone or grout and leaves a fresh, clean scent. You can use it on bathrooms, countertops, backsplashes, floors, and walls.
Product Highlights
The StoneTech Mold and Mildew Stain Remover is recommended for natural stones such as marble, granite, limestone, travertine, and slate. Its safe spray leaves behind a fresh and clean scent. To verify ease of use and desired results on this product, always test on a small surface before proceeding.
The Good
The good thing about the StoneTech Mold and Mildew Stain Remover is it does not damage and degrade the stone or grout. And its unique formula leaves a fresh and clean scent making it easier to use.
The Bad
The smell is hard to remove when the product accidentally goes into your hands. It can also cause skin and eye irritation, so you should use protective eyewear and gloves when using it.
PROs
- Does not smell bad
- Removes molds and mildews on the first use
- Does not degrade the quality of natural stones and does not damage grout
CONs
- Hard to remove smell when on hands
- A bit pricey on the market
Clorox Tilex Mold And Mildew Remover
The Clorox Tilex Mold and Mildew Remover is a product that delivers powerful cleaning because you can do it without scrubbing the surface. This product kills 99.9% of household molds and mildews.
Product Highlights
The CloroxTilex mold and mildew remover is very easy to use. You can use it and remove unsightly molds and mildews without scrubbing the surface applied with this product. It cleans and eliminates stains right before your own eyes.
The Good
Unlike other brands, the Clorox Tilex Mold and mildew remover is much easier to use, making it among the best product to clean mold and mildew. Some brands need to be soaked first and do a lot of scrubbing. Unlike this product, you can remove the stain after applying it without scrubbing it, so it’s less hassle.
The Bad
The little problem is the product’s scent is a bit strong, and it is a bit irritating in the eyes, so it is recommended to be in a ventilated area when using it.
PROs
- Quickly removes stains
- Cleans without having to scrub
- Kills 99.9% molds and mildews
CONs
- Irritating to the eyes
- Has a strong scent
Miracle Mist ENCRMMIC4 Instant Mold And Mildew Stain Remover
Miracle Mist Instant Mold Remover removes old molds and mildews. You can rely on its concentrated solution to deal with stubborn stains from molds.
Product Highlights
The stain remover removes molds and mildews as it deeply penetrates surfaces and removes years and ages of dirt, molds, grimes, mildew, and algae giving you the best result you want. And to top it all, you just have to rinse it with water, and you’re done with the job.
The Good
The good part about the Miracle Mist Instant Mold Remover is you don’t have to scrub so hard to remove molds and stains, saving you a lot of time to do more important jobs.
The Bad
Since it is a concentrated solution, it has a strong scent and might sting if it comes in contact with your skin. That’s why you should wear gloves or other protective equipment while using to prevent such accidents.
PROs
- Deeply penetrates surfaces
- It is fast-acting
- No need for deep scrubbing
CONs
- Strong bleach scent
- Product may be harmful when inhaled
Eco Clean Solutions Mold, Mildew, And Algae Remover
Are you tired of getting products without getting results? This mold remover is guaranteed not to waste your time and money with the promise to get you your money back if you are not satisfied with the results.
Product Highlights
This product is among the best product to clean mold and algae. It is effortless and easy to use. You can use it on almost any surface. You can use it in bathrooms, countertops, boats, stainless sink, and many more. You can see the desired results in just minutes.
The Good
EcoClean Solutions saves you a lot of time and money. Just spray the solution to the surface, wait for a minute, rinse it with water, then it is already gone. ZERO scrubbing is needed. That’s how effective it is.
The Bad
The down-side of its industrial-grade solution is the risk of harm from this strong chemical. It has a burning sensation when the chemical comes in contact with your skin. You better wear protective equipment like gloves to prevent this from happening.
PROs
- Can be used on almost any surface
- Zero scrubbing is needed. Just rinse with water
- Fast result, easy to use, and saves you a lot of time and money
CONs
- Paint dissolves when applied on a surface with paint
- Strong chemical components
RMR-86 Pro Instant Mold Stain & Mildew Stain Remover
RMR-86 Pro Instant Mold Remover is a contractor grade product specifically made for professional use with 5x strength of typical stain removal products. Its high concentration equips it to fight almost all kinds of stains and molds.
Product Highlights
This product has a quick-acting formula that quickly gives you results. It can also be used on multiple surfaces. This product is also ready to use. You don’t have to dissolve it with water or anything.
The Good
The RMR-86 Pro Instant Mold Remover is one of the best product to clean mold and mildew. It deeply penetrates surfaces making it possible to remove stubborn stains in just seconds. Directly apply to surfaces with molds and stains, and it will get the job done quickly and efficiently.
The Bad
This product might leave a white residue on some surfaces because of its chemical components. You have to read the label thoroughly to determine the surfaces where you can apply this product.
PROs
- Contractor grade quality
- Quick-acting formula and ready to use
- Can be applied to multiple surfaces
CONs
- Leaves white residues on some surfaces
- Strong chemical components
Zep Mold Stain And Mildew Stain Remover Zumildew
The Zep Mold and Mildew Stain Remover have been trusted by professionals for over 80 years, establishing expertise in developing professional cleaning solutions. This mold and mildew stain remover is easy to use and produces instant results.
Product Highlights
Its industrial-strength formula quickly dissolves mold and mildew stain on different surfaces. It powers through the molds and mildews and dissolves stains rapidly and effectively. It is also a bleach-based product, so it whitens fiberglass, porcelain surfaces, and tiles.
The Good
It saves you a lot of time and money because you don’t have to scrub the surface applied. It is quick and easy to use.
The Bad
The Zep Mold and Mildew Stain Remover cannot be used on faucets, vinyl, marble, and painted surfaces. Its industrial-strength formula might affect the quality and might damage it when applied to these surfaces.
PROs
- Ready-to-use
- Quick and efficient
- Whitens some surfaces such as tiles and porcelain
CONs
- Cannot be used on vinyl, faucets, and marble
- Harmful to skin
Star Brite Mold & Mildew Stain Remover
This professional-grade product has a high alkaline, triple-action formula that lifts dirt and stains cuts grease and grime, and removes molds and mildew upon contact. This definitely puts it on the list of the best product to clean mold and mildew.
Product Highlights
Starbrite Mold and Mildew Stain Remover is made more effective and more efficient with its deep-cleaning function. This stain remover quickly eliminates molds and mildew stains without the need for heavy scrubbing.
The Good
You can use Starbrite Mold and Mildew Stain Remover on different surfaces such as fiberglass, wood, tile and grout, vinyl upholstery, and even on some outdoor acrylic fabrics. It is also highly recommended for professional use.
The Bad
This product also contains bleach, which is a strong chemical. You should be wearing protective equipment when using this product to prevent unnecessary accidents. Avoid contact with your skin or eyes.
PROs
- Can be used on several surfaces
- Triple-action formula; lifts dirt, cuts grease and grime, removes unwanted molds and mildews
- Deep-cleaning function
CONs
- Some strong chemical component
- The smell sticks to your hands
Conclusion
Stubborn stains can be a real test of patience. Thanks to high-grade mold cleaners that offers instant results and outcomes. The time we have spent scrubbing and cleaning hard to remove stains can now be spent on other meaningful things like spending time with our family. Now that we have given you the list of the best product to clean mold and mildew, I hope you have picked a cleaner that suits your need. Enjoy cleaning! Find out more about mildew sprays here!